Oxdale SE400 Log Splitter

When combined with the unique axe-head (see photo below), it allows a 10 tonne capacity ram to be fitted which makes the splitting operation very quick. The SE400 is easily moved around on pneumatic tyres and only has a width of a meter.

• Hydraulic log splitter driven off a 6.5hp Honda petrol engine
• 10 tonne splitting force
• The log splitter has been designed to be easily wheeled by hand to the location where it is to be used
• The log splitter can be used in any different number of locations from the back garden to the paddock beside the wood shed
• Powerful enough to cope with the most demanding of splitting jobs
• The splitting wedge is specially forged, hardened and has a double chamfer to give the best splitting action available on the market
• For added safety all the hydraulic pipes are covered in anti burst lagging and both hands are required on the lever to operate the ram
• Lifting the lever will power the splitting wedge through the logs and lowering the lever will retract the ram. It takes under ten seconds to make a complete cycle of the ram. The platform is self cleaning of large logs

• Capable of splitting logs up to 18 inch high and is not limited to the width of logs it can split
• Dimensions:
  72cm – Floor to table
  84cm – Width wheel to wheel
  196cm – High
  61cm – Table width

• Horsepower: 5.5bhp at 3600rpm
  Weight: 95 kg
  Engine: Honda GX200
  Max operating pressure: 3625 psi/250 bar
  Fuel consumption: 1.9 l/hr
  Ram bore diameter: 60 mm
  Ram stroke: 400 mm
  Noise level: <104 db